The development of solar street lights is getting better and better, gradually replacing traditional street lights. Because it is energy-saving, environmentally friendly, and easy to maintain, more and more urban roads and rural areas are beginning to install solar street lights.
Especially in rural areas, because various hardware facilities are relatively incomplete, solar street lights should be a better choice. However, no matter how good it is, there will be some unpredictable problems.
SUNVIS Solar Street Lighting Factory will introduce to you the common problems and solutions of solar street lights.
The solar panel of the solar street light cannot accumulate dust for a long time, because it is not conducive to the solar panel to absorb sunlight. If the solar panel has a shady surface, that string of solar panel may cause an open circuit. But under normal circumstances, the solar panel of the solar street light does not need to be cleaned frequently
Yes, because when it rains, it will wash away the dust on the solar street light panels. If it does not rain for a long time, then occasionally clean the solar panels.
Solar panels are very strong, generally composed of fairly strong tempered glass panels. Regular manufacturers will subject solar panels to hail tests, so there will be no problems with the panels of this type of solar street light, even if it is Heavy rain or hail are all resistant to a certain degree.
As we all know, solar street lights use solar panels to absorb sunlight and convert them into electrical energy and store them in batteries.
At night, the battery discharges the lamp cap to make the solar street lights light up. The orientation of the photovoltaic module determines how much sunlight the solar panel can absorb and how much electricity can be converted into.
If the direction is wrong, less sunlight will be absorbed, and the light may not stay on for a long time or not at all.
The photovoltaic cells of solar street lights generally have to face south, so that the photovoltaic modules can absorb and receive more and more even light radiation. But don't worry too much, because most manufacturers will design the best inclination angle for solar panels based on the area's sunshine conditions.
The solar panel must absorb enough sunlight to convert it into electricity.
If the solar panel is installed in a shaded place, it will absorb less sunlight and the output of the battery will be relatively small.
Generally, solar street lights should not be installed in shady places Fang, avoid places with obstructions, because it is not afraid of wind and sun, and can be absorbed throughout the day.
Sunlight is good for the operation of solar street lights.
What should I do if the lights of solar street lights don't turn on?
This is undoubtedly a question that customers most want to ask. If this problem really occurs, the first thing we need to do is to check whether the indicator light of the battery is on.
If it is not on, it may be that the connection line between the controller and the battery has fallen off. At this time, we need to ask a professional person and come and connect.
If the wiring is missing, then we have to check whether the battery voltage is normal.
If it is not normal, then we have to make the controller worse.
With the continuous improvement of people's awareness of environmental protection, solar street lights are widely used in modern cities and urban construction.
As long as you pay more attention to the 5 common problems of solar street lights, you can solve them in time. The service life is relatively long.
The above is the relevant information about common problems and solutions of solar street lights for you from SUNVIS Solar Street Lighting Factory.
Would you like to know more information? Please click on the below to send us your inquiry or call for consultation.